Terbly TP02-CW User Manual page 18

1．Access the main menu.
2．Press <Up/Down>, the display will show"Set
3．Press< ENTER>, the display will show"Set
4．The display show "2.0,2.2,2.4,2.6,2.8".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3.8. Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
1．Access the main menu.
2．Press <Up/Down>, the display will show"Reset Default".
3．Press< ENTER>, the display will show"Reset Default".
4．The display show"OFF",Press <Up/Down>, the display will show "ON".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.4. EFFECT ADJUST
9.4.1. Test Channel
With this function you can test each channel's function to ensure correct operation.
1．Tap <MODE/ESC> button，access the main menu，Tap the <Up/Down> button until
"Effect Adjust" is displayed. Press <ENTER>, the display will show "Effect Adjust".
2．Press <Up/Down>, the display will show "Test Channel".
3．Press< ENTER>, the display will show "Test Channel".
4．The display shows "Pan Moving" first channel, Press <Up/Down>, can choose other
channel.
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.4.2. Manual Control
When set to Manual Mode, fixture will be back to factory settings. If want to adjust
brightness, can adjust by shutter and dimming channel, channel value is 0-255. Other
functions can be set according to user's real need.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Effect Adjust" is displayed. Press< ENTER>, the display will show "Effect Adjust".
2．Press <Up/Down>, the display will show "Manual control".
3．Press< ENTER>, the display will show "Manual control".
4．The display show "PAN=XXX".......
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.5. USERS MODE SET
UserMode
With this function, you can create user defined channel orders.
1．Access the main menu.
2．Press <Up/Down>, the display will show "
3．Press< ENTER>, the display will show "
4．The display show "1CH" ,Press <Up/Down>, the display will show "3CH".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.6. Language Set
With this function, you can set the device language to English or Chinese, the default is
Chinese.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
TP02-CW,WW User Manual
".
Gamma
".
Gamma
".
UserMode
".
UserMode
17 XM1268/1257-V1.0-NR