Terbly TP02-CW User Manual page 14

3. Press ENTER, the display will show "
4. Tap the <Up/Down>button，choose each channel.
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.2. INFORMATION
9.2.1. Time information
Current Time
With this function, you can display the temporary running time of the device from the last
power on. The display shows "XXXX", "XXXX" stands for the number of hours. The
counter is resetted after turning the device off.
1. Access the main menu.
2. Press <Up/Down>, the display will show "Current Time".
3. Press< ENTER>, the display will show"Current Time".
4. The display will show "XXXX" (Hours) ；
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Total Run Time
With this function, you can display the running time of the device. The display shows
"XXXX", "XXXX" stands for the number of hours.
1. Access the main menu.
2. Press <Up/Down>, the display will show "Total Run Time".
3. Press< ENTER>, the display will show"Total Run Time".
4. The display will show "XXXX" (Hours) ；
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Last Run Time
With this function, you can display last the running time of the lamp. The display shows
"XXXX", "XXXX" stands for the number of hours
1. Access the main menu.
2. Press <Up/Down>, the display will show "Last Run Time".
3. Press< ENTER>, the display will show"Last Run Time".
4. The display will show "XXXX" (Hours) ；
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
LastRun Password
With this function, you can display the timer password.
1. Access the main menu.
2. Press <Up/Down>, the display will show "LastRun Password".
3. Press< ENTER>, the display will show "LastRun Password" . The time password is 038.
4. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Clear Last Run
With this function, you can clear last run time of the fixture. The display shows "ON" or
"OFF", Press "Enter" to confirm.
1. Access the main menu.
2. Press <Up/Down>, the display will show "Clear Last Run".
3. At"
TimePass
TP02-CW,WW User Manual
"menu input right password, Press< ENTER>, the display will show
".
ValuDisp
13 XM1268/1257-V1.0-NR