Terbly TP02-CW User Manual page 17

Key Lock
With this function you can activate the automatic keylock status. If this function is activated,
the keys will be locked automatically after exiting the edit mode for 15 seconds. keeping
press the [MENU] key for 3seconds if you do not need this function.
1. Access the main menu.
2. Press <Up/Down>, the display will show"Key Lock".
3. Press< ENTER>, the display will show"Key Lock".
4. The display show "OFF",Press <Up/Down>, the display will show "ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Disp Flash
With this function you can the entire display to be flipped by 180˚ to allow for better view
when the fixture is hung from truss or a ceiling. This function is disabled as default.
1．Tap <MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button
until "Personality" is displayed. Press< ENTER>, the display will show "Personality".
Tap the <Up/Down>button until the display will show "Display Setting". Press
<ENTER>, the display will show "Disp Flash".
2．Press <Up/Down>, the display will show " Disp Flash".
3．Press< ENTER>, the display will show "Disp Flash".
4．The display show "ON", Press <Up/Down>, the display will show "OFF".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3.4. Temperature C/F
With this function, Display the temperature for Celsius or Fahrenheit.
1．Access the main menu.
2．Press <Up/Down>, the display will show"Temperature C/F".
3．Press< ENTER>, the display will show"Temperature C/F".
4．The display show "Celsius",Press <Up/Down>, the display will show "Fahrenheit".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3.5. Dimmer Mode
1. Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality" is displayed. Press <ENTER>, the display will show "Personality". Tap
the <Up/Down> button until the display will show "Status settings". Press <ENTER>,
the display will show "Status settings".
2. Press <Up/Down>, the display will show "Dimmer Mode".
3. Press< ENTER>, the display will show "Dimmer Mode".
4. The display show "Standard", Press <Up/Down>, the display will show "Stage",
"TV" .... "Architectural" or "Theatre".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3.6. Freq Refresh
1．Access the main menu.
2．Press <Up/Down>, the display will show"Freq Refresh".
3．Press< ENTER>, the display will show"Freq Refresh".
4．The display show"900-1500Hz,2.5K,4K,5K,10K,15K,20K,25K",Press <Up/Down>,
the display will show "ON" ,.
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3.7. Set Gamma
TP02-CW,WW User Manual 16 XM1268/1257-V1.0-NR