Compliance With The European Machinery Directive - ABB ACS880-37LC Hardware Manual

184 The Safe torque off function
Standard
IEC 61326-3-1:2017
IEC 61508-1:2010
IEC 61508-2:2010
IEC 61511-1:2016
IEC 61800-5-2:2016
EN 61800-5-2:2007
IEC 62061:2005 + A1:2012 +
A2:2015
EN 62061:2005 + AC:2010 +
A1:2013 + A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
The function also corresponds to Prevention of unexpected start-up as specified by
EN ISO 14118:2018 (ISO 14118:2017), and Uncontrolled stop (stop category 0) as specified
in EN/IEC 60204-1.
￭

Compliance with the European Machinery Directive

See the technical data.
The Declaration of conformity is shown at the end of this chapter.
Name
Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 3-1: Immunity requirements for safety-related systems
and for equipment intended to perform safety-related functions (functional
safety) – General industrial applications
Functional safety of electrical/electronic/programmable electronic safety-
related systems – Part 1: General requirements
Functional safety of electrical/electronic/programmable electronic safety-
related systems – Part 2: Requirements for electrical/electronic/program-
mable electronic safety-related systems
Functional safety – Safety instrumented systems for the process industry
sector
Adjustable speed electrical power drive systems – Part 5-2: Safety require-
ments – Functional
Safety of machinery – Functional safety of safety-related electrical, elec-
tronic and programmable electronic control systems
Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design
Safety of machinery – Safety-related parts of control systems – Part 2:
Validation