ABB ACS880-37LC Hardware Manual page 92

92 Electrical installation
9. Seal the gap between the cable and mineral wool sheet (if used) with sealing compound
(eg. CSD-F, ABB brand name DXXT-11, code 35080082).
10. Connect the twisted shields of the cables to the PE busbar of the cabinet.
11. Connect the phase conductors of the input cable to the L1, L2 and L3 terminals. Tighten
the screws to the torque given under
12. Reinstall the shrouding removed earlier.
13. Close the cubicle door.
Tightening torques (page 163).