Decode Settings - Denso BHT-1700 Series User Manual

13.4. Decode Settings

Select [Decode settings] at the barcode scanner settings, and the setting menu related to decode starts up.
1D
 Same barcode interval time
The BHT has a function for preventing from reading the same label again after reading barcodes by momentary,
alternate and continuous modes. When it is required to read the same data again with these modes, keep on
illuminating the light at the place where barcodes or anything like that does not exist for a period specified by
this setting value.
As for 1D and 2D models, 0.1 to 25.5 seconds can be set at intervals of 100 ms. As for 2D long model, 0.1 to
2.5 seconds can be set at intervals of 100 ms. Default: 1 second (10 x 100 ms)
1D, 2D
Setting range: 0 - 255
(x 100 ms)
Default: 10 x 100 ms
2D
2D Long
Setting range: 0 -25
(x 100 ms)
Default: 10 x 100 ms
- 135 -
2D Long