Denso BHT-1700 Series User Manual page 90

6.3.6.10 Storing WLAN Settings Permanently
The exported WLAN settings file can be stored permanently without losing the setting contents after
Enterprise Reset by storing it in the internal shared storage/StartupSettingsData/Setup/wlan/ folder and
storing the xml file with the setting described below in the internal shared
storage/StartupSettingsData/Setup/ folder (*1).
(WLAN settings file name must be WLAN_user_cfg.ini/WLAN_user_profile.bin.)
The same setting contents can be reflected on another BHT by exporting the contents that are set in one
BHT, storing them in the above directory of another BHT, and executing Enterprise Reset to the BHT.
If IP setting is "static", IP address will also be copied. In this case, set IP address varying by each BHT after
reflecting the settings.
If multiple BHTs with the same IP address are connected to the same network, only one of them can
communicate.
<?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<Settings>
<Information>
<string name="FormatVer">1.00.00</string>
</Information>
<Common>
<boolean name="Reboot" value="true"/>
</Common>
<set name="AutoExec">
<string> com.densowave.wlansettingservice/.WlanSettingService</string>
</set>
</Settings>
(*1) Saving the xml file is not required for the OS version v1.00.03 or later.
6.3.6.11 Terminal Information Check
Tap Terminal Information, and the WLAN related information saved on the terminal is displayed.
- 79 -