Advanced Data Formatting (Adf) - Denso BHT-1700 Series User Manual

13.6.10. Advanced Data Formatting (ADF)

 Enabled
ADF is enabled.
 Script file
A script file describing ADF script is selected.
For the contents of the script file, refer to the ADF Script User's Guide for Android.
 Count unit
Select the count unit type from Char/Byte. Specify the unit of digits used in ADF script. Default: Char
 Separate method
Select the separate method type from Number/Separator. Specify how to divide into fields used in ADF script.
Default: Number
 Number
It is used when you specify number of separate method. You can designate the number of characters for up to
90 fields. A field which has no character (the number of characters = 0) is not allowed.
 Separator
It is used when you specify separator of separate method. You can specify up to 10 delimiters. When multiple
delimiters are specified, data fields are separated by any delimiter.
 Test
Selected script files are tested.
Press the [START] button, and data "1234567890ABCDEF" are edited and the result is output conforming to
rules described by the selected script file.
If a script file that may be involved in the infinite loop accidentally is created, press [ABORT] button and you can
suspend the data edit test.
When ADF is used, reading data can be edited only by creating simple script.
Describe rules for editing data in the script file. For creation procedure of script, refer to
ADF script specifications.
Select [Advanced data Formatting] on the data edit setting menu, and the script file
selection menu starts up.
- 150 -