Sntp Function - Denso BHT-1700 Series User Manual

3.12. SNTP Function

With the SNTP function, you can set the date and time at any time interval from any SNTP server.
By default, SNTP function is disabled.
Tap All Apps
(1) Initial screen
Tap SNTP icon to start up, and the following screen appears.
When the SNTP function has already been ON, the currently set contents are displayed.
When SNTP function is OFF
(2) To enable SNTP function
Enable this function as described below.
① Check the box of SNTP.
② Enter URL of NTP server or IP address to
be synchronized.
③ Select the interval time.
* Alternatives: 30 min., 60 min., 6 hours,
24 hours
④ Press the "SETTING" button.
When you do the above procedure, the
screen is finished, the time is acquired
from the server of ② at the time
interval selected in ③, and the system
time is set.
* If the "DEFAULT" button is pressed, the value
is returned to the following default value.
NTP Server: 2.android.pool.ntn.org
Interval Time: 30 min
* When the SNTP function is enabled,
"Automatic date & time" in the "Date &
time" will be OFF.
– Note –
For models without LTE, set the time zone manually before enabling SNTP.
| Settings |SNTPSetting to start up.
When SNTP function is ON
1
2
3
4
- 27 -