Enabling reading
When a switch is turned ON, the barcode reading is
enabled.
When a switch is turned OFF, the barcode reading is
disabled.
Reading enabling/disabling by API takes precedence.
Default: Disabled
This setting value takes precedence.
When it is checked, setting values set by this menu except for
reading enabling settings take precedence over the setting
value set by API.
As for default, the setting values set by API take precedence.
Enter SQRC Settings.
Switch ON only while communicating with PC in order to set
administration code or encryption key. Switch OFF after the
communication.
Refer to "BHT-1700/1800 SQRC Settings manual" for more
detail.
13.3. Scan Settings
Select [Scan settings] at the barcode scanner settings, and the scan settings menu starts up.
1D
2D
- 132 -
2D Long