Decode Level; Codabar; Codemark - Denso BHT-1505B User Manual

 "2: DECODE LEVEL"
Set the decode level (code reading tolerance level).
Press [ ] to decrease the setting value and [ ] to increase the setting value.
Setting range: 1 – 9 (default: 4)
Setting a lower value improves the reading rate but increases the risk of incorrectly reading poor quality
codes (split or dirty codes). Conversely, setting a higher value reduces the reading rate but decreases the
risk of such errors.
 "3: ITF": Minimum number of digits to be read for ITF
 "4: STF": Minimum number of digits to be read for STF
 "5: CODABAR": Minimum number of digits to be read for Codabar
Set minimum number of digits for the code to be read.
Press [ ] to decrease the setting value and [ ] to increase the setting value.
Setting range of ITF:
Setting range of STF:
Setting range of Codabar:
Setting a small number of digits increases the frequency of missing digits when reading or incorrectly
reading depending on how codes are read or the quality of codes.
On the other hand, setting a large number will decrease the possibility of such errors.
 "6: CODEMARK": Setting the types of Code mark
Set the types of Code mark.
"ORIGINAL": CODE MARK Type1
CODE MARK system is defined by DENSO Corporation.
"AIM": CODE MARK Type2
CODE MARK system is compliant with "Guidelines on Symbology Identifiers" by AIM USA.
2 – 20 (default: 4)
1 – 20 (default: 3)
3 – 20 (default: 4)
BARCODE Handy Terminal
83