Denso BHT-1700 Series User Manual page 148

 Point scan mode
Enables/disables the point scan reading.
When the point scan is enabled, a code can be read by aiming it at the center cross section of the laser light
marker beam. A code cannot be read in the point scan mode, for example, if there is no code within the cross
section or if unable to detect the marker beam due to external light. This scan mode can be used only when
the marker illumination is enabled.
1D
Does not support
 Reverse decode
When the function for reading mirror image 2D code is set to ON, reading of a 2D code viewed from the
reverse side is enabled.
1D
Does not support
- Reference -
Enabling the mirror image 2D code reading may increase time for reading 2D
codes.
 Charset
Selects the encoding method of barcodes.
Select an encoding method from any of the following alternatives, or specify an encoding method other than
below with character string directly.
UTF-8 / UTF-16 / UTF-16BE / UTF-16LE / ISO-8859-1 / Shift-JIS / GB2312 / Big5 /EUC-KR
Default: Disabled
2D, 2D Long
Default: Disabled
2D
Default: Disabled
- 137 -
2D Long
Does not support