How To Attach The Weather Protection To The Device - KROHNE OPTIFLEX 1300 C Quick Start Manual

INSTALLATION
2

2.10.10 How to attach the weather protection to the device

Equipment needed:
• Device
• Weather protection (option)
• 10 mm wrench (not supplied)
Refer to "Technical data: Dimensions and weight", for the overall dimensions of the weather
protection.
Figure 2-36: Installation of the weather protection
• Loosen the bracket nuts on the weather protection. Remove the bracket.
• Lower the weather protection onto the device. Turn the weather protection so that the keyhole
points forward.
• Attach the bracket.
• Lift the weather protection to the top of the housing support pillar. Hold the weather
protection in the correct position and tighten the bracket nuts.
36 www.krohne.com
OPTIFLEX 1300 C
03/2014 - 4000049806 - QS OPTIFLEX 1300 R09 en