How To Attach The Weather Protection To The Device - KROHNE OPTIFLEX 1300 C Handbook
Level meter
Hide thumbs
Also See for OPTIFLEX 1300 C:
- Handbook (196 pages) ,
- Quick start manual (48 pages) ,
- Supplementary instructions manual (12 pages)
Table of Contents
Advertisement
OPTIFLEX 1300 C
3.8.10 How to attach the weather protection to the device
Equipment needed:
• Device
• Weather protection (option)
• 10 mm wrench (not supplied)
Refer to "Technical data: Dimensions and weight", for the overall dimensions of the weather
protection.
Figure 3-46: Installation of the weather protection
• Loosen the bracket nuts on the weather protection. Remove the bracket.
• Lower the weather protection onto the device. Turn the weather protection so that the keyhole
points forward.
• Attach the bracket.
• Lift the weather protection to the top of the housing support pillar. Hold the weather
protection in the correct position and tighten the bracket nuts.
09/2010 - 4000172305 - HB OPTIFLEX 1300 R06 en
www.krohne.com
INSTALLATION
3
53
Advertisement
Table of Contents
