OPTIFLEX 1300 C
2.10.11 How to open the weather protection
Equipment needed:
• Weather protection attached to the device.
• Large slotted tip screwdriver (not supplied).
Figure 2-37: How to open the weather protection
1 Weather protection in its closed position
2 Weather protection in its open position. Minimum clearance in front of the device: 300 mm / 12¨.
• Put a large slotted tip screwdriver into the keyhole at the front of the weather protection. Turn
the screwdriver counterclockwise.
• Pull the top of weather protection up and forward.
i
This will open the weather protection.
03/2014 - 4000049806 - QS OPTIFLEX 1300 R09 en
www.krohne.com
INSTALLATION
2
37