Lubrication Guide - Optional Fluid - Sullair ES-6 SERIES User Manual

ES-6 USER MANUAL
at the first filter change and sent to the factory for
analysis. This is a free service. A sample kit with
instructions and self-addressed container is to be
supplied by your Sullair Representative at start-up.
The user will receive an analysis report with
recommendations.
3.4 LUBRICATION GUIDE - OPTIONAL
FLUID
Sullair compressors may use SRF 1/4000 fluid as
an optional factory fill.
CAUTION
Mixing of other fluids within the com-
pressor will void all warranties.
Table 3A - Lubrication Guide
LUBRICANT
Sullube
SRF 1/4000
24KT
A - 8,000 Hours or once a year.
B - 4,000 Hours or more frequently if conditions so require.
C - When required by fluid analysis or known contamination.
D - Does not require replacement during normal service condidtions.
E - Every 2000 hours.
FLUID CHANGE
A C
B C
D C
Section 3 - SPECIFICATIONS
SRF 1/4000 fluid should be changed every 4000
hours or once a year, whichever comes first. The
fluid should be changed more frequently under
severe operating conditions, such as high ambient
temperatures coupled with high humidity, or when
high particulate level, corrosive gases or strong
oxidizing gases are present in the air.
Maintenance of all other components is still
recommended as indicated in the Operator's
Manual.
FLUID FITER CHANGE
E
E
E
SEPARATOR CHANGE
A
B
A
12