Sullair ES-6 SERIES User Manual page 16

ES-6 USER MANUAL
COMPRESSOR
Type:
Minimum Full Load Operating Pressure:
Maximum Full Load Operating Pressure:
Bearing Type:
Cooling:
Lubricant:
Sump Capacity:
(VI) Compressors are available for pressures up to 175 psi (12.1 bar).
MOTOR
Type:
Synchronous Speed:
Voltage:
Standard All Sizes Optional All
Sizes
Optional All Sizes
Optional 5HP Only
Type:
Insulation Class:
Maximum Ambient Temp.:
Shaft Diameter Fan:
Key Size Fan:
FLUID FILTER
(Internal Bypass Valve Set at 25 psig)
Type:
Micron:
FLUID SEPARATOR ELEMENT
Type:
Efficiency at Maximum Capacity:
Single Stage Fluid Injected Screw Compressor
60 psi (4.1 bar)
Nameplate Pressure (VI)
Anti-friction
Pressurized Fluid
See Lubricant Specification (Section 3.2)
4.6 quarts (4.35 liters)
60Hz
5, 7.5, 10HP/ 4, 5.5 & 7.5 KW 1.15 S.F.
1800 RPM
230/460V 3 Phase 200V 3 Phase
575V 3 Phase 200V 3 Phase
230V Single Phase
Totally Enclosed Air Over
"F"
40°C (104°F)
Nominal 5/8"
Nominal 3/16" x 3/16" x 1 1/4"
Spin on, Sullair Proprietary
23 Microns Abs.
Push In Cartridge, Sullair Proprietary
3PPM Maximum
Section 3 - SPECIFICATIONS
50Hz
5, 7.5, 10HP/ 4, 5.5 & 7.5 KW
1500 RPM (5, 7.5HP/4, 5.5KW)
3000 RPM (10HP/7.5KW)
380/415 3 Phase 380/415 3 Phase
380/415 3 Phase
-
Totally Enclosed Air Over
"F"
40°C (104°F)
Nominal 5/8"
Nominal 3/16" x 3/16" x 1 1/4"
10