Radius (Id=1105); Ibutton List (Id=1610-1659); Io Parameters; Io#1 Property Parameter (Id=1300) - Teltonika FM1100 User Manual

8.6.11.6

Radius (ID=1105)

Parameter represents radius of circle with center device coordinates after
activating AutoGeofence feature.
Minimu Maximu
m value m value
4294967
0
295

8.6.12 iButton List (ID=1610-1659)

Read 5.4.4.
Minimu Maximu
m value m value
FFFFFFFF
0
FFFFFFFF

8.7 IO parameters

IO properties – are additional data sources which are recorded along with
usual GPS data.

8.7.1 IO#1 property parameter (ID=1300)

Parameter defines IO property value. Possible values: enabled (value 1),
disabled (value 0).
Minimu Maximu
m value m value
0 byte

8.7.2 IO#1 priority (ID=1301)

Parameter defines IO property type of priority: 0 is low, 1 – high, 2 – panic, 3
– security priority type.
Minimu Maximu
m value m value
0 3
Recommen Goes with (depends on)
ded value
Enable/Disable (ID=1101)
100
Deactivate by (ID=1100)
Recommen Goes with (depends on)
ded value
Digital Output No.2 usage
- scenarios (ID=1601)
Deactivate by (ID=1100)
Recommen Goes with (depends on)
ded value
IO#1 priority (ID=1301)
IO#1 High level (ID=1302)
IO#1 Low level (ID=1303)
-
IO#1 logic operand
IO#1 averaging length
Recommen Goes with (depends on)
ded value
IO#1 property parameter
IO#1 High level (ID=1302)
0
IO#1 Low level (ID=1303)
IO#1 logic operand
(ID=1103)
parameters
parameters
parameters
(ID=1304)
(ID=1305)
parameters
(ID=1300)
(ID=1304)
Value
type
U32
Value
type
U64
Value
type
S8
Value
type
S8
62