Radius (Id=1105); Accelerometer Parameters; Acceleration Range Configuration (Id=1290); Acceleration Threshold Configuration (Id=1291) - Teltonika FM1010 User Manual

8.6..13 Radius (ID=1105)

Parameter represents radius of circle with center device coordinates after activating
AutoGeofence feature.
Minimum Maximum
value value
0 1000000
8.7

Accelerometer parameters

8.7..1

Acceleration range configuration (ID=1290)

Parameter represents range of movement detection in G force.
Minimum Maximum
value value
2 16
8.7..2

Acceleration threshold configuration (ID=1291)

Parameter represents threshold when movement is detected in mG.
Minimum Maximum
value value
1 16 000
8.7..3

Acceleration duration (ID=1292)

Parameter specifies how long acceleration must present on any axis for movement to be
detected in milliseconds.
Minimum Maximum
value value
0 600
8.7..4

Movement filter start (ID=1293)

Parameter represents how long it takes to generate movement event in seconds.
Minimum Maximum
value value
1 60
8.7..5

Movement filer stop (ID=1294)

AutoGeofence event Priority
Recommended Goes with (depends on)
value
Enable/Disable (ID=1101)
100
Recommended Goes with (depends on)
value
2
Recommended Goes with (depends on)
value
200
Recommended Goes with (depends on)
value
0
Recommended Goes with (depends on)
value
0
(ID=1103)
parameters
parameters
Ignition Source (ID=1003)
parameters
Ignition Source (ID=1003)
parameters
Ignition Source (ID=1003)
parameters
Ignition Source (ID=1003)
Value
type
U32
Value
type
U32
Value
type
U32
Value
type
U32
Value
type
U32
64