Records Settings; Gsm Settings, Gprs Part - Teltonika FM1100 User Manual

GPS
Static Navigation
Mode

5.8 Records settings

Here user can modify if FM1100 device will send newest records first,
meaning, that the most important thing is to know recent position of car, older
records are being sent right after newest records arrive to AVL application.
Activate Data Link Timeout is used to set timeout of link between FM1100
and AVL application termination. If FM1100 already sent all records it waits for
new records before closing link. If new records are generated in the period of this
timeout, and minimum count to send is reached, they are send to AVL
application. This option is useful in conditions where GSM operators put charge on
every link activation.

5.9 GSM settings, GPRS part

'GPRS' define main parameters for FM1100: GSM operator APN and GPRS
username and password (optional – depending on operator), destination server
IP and port, and allows to set protocol used for data transfers – TCP or UDP
Some operators use specific authentication for GPRS session – CHAP or PAP.
If any of these is used, APN should be entered as '
operator is using APN 'internet' with CHAP authentication, it should be entered as
' '. Information about APN and authentication type should be
internet:c
provided by your GSM operator.
GPS fix is available
vehicle speed is lower than 5
km/h
while GPS fix is unavailable, Object Motion Detection Settings is
working like previously mentioned Msensor mode
This is a filter, which filters out track jumps when the object is
stationary.
Figure 18. System settings configuration
Figure 19. Records settings configuration
and
GPS fix is available and vehicle
speed is higher than 5 km/h
<APN>:c
' or ' '. I.e. if
<APN>:p
27