Vega VEGABAR 86 Operating Instructions Manual page 34

6 Set up the sensor with the display and adjustment module
Reset - Setup
Menu item
Measurement loop name
Application
Units
Position correction
Adjustment
Damping
Lock adjustment
Reset - Display
Menu item
Menu language
Displayed value 1
Displayed value 2
Display format 1 and 2
Backlight
34
The following reset functions are available:
Delivery status: Restores the parameter settings at the time of
shipment from the factory, incl. the order-specific settings. Any user-
defined linearisation curve as well as the measured value memory are
deleted.
Basic settings: Resets the parameter settings, incl. special param-
eters, to the default values of the respective instrument. Any pro-
grammed linearisation curve as well as the measured value memory
are deleted.
The following table shows the default values of the instrument. De-
pending on the instrument version or application, all menu items may
not be available or some may be differently assigned:
Parameter
Application
Slave for electronic differ-
ential pressure
Unit of measurement
Temperature unit
Zero/Min. adjustment
Span/Max. adjustment
Integration time
Default value
Selected language
Current output in %
Ceramic measuring cell: Measuring cell temperature in °C
Metallic measuring cell: Electronics temperature in °C
Number of positions after the decimal point, automatically
Switched on
Default value
Sensor
Level
Deactivated
mbar (with nominal measuring range ≤ 400 mbar)
bar (with nominal measuring ranges ≥ 1 bar)
°C
0.00 bar
0.00 bar
0.00 %
Nominal measuring range in bar
100.00 %
1 s
Released
VEGABAR 86 • Modbus and Levelmaster protocol