Low Operating Voltage Alarm; Power Outage Alarm - Labkotec idOil-30 3G Installation And Operating Instructions Manual

Installation and Operating Instructions | idOil-30 3G, idOil-30 Battery 3G
6.4.

Low operating voltage alarm

If the unit's operating voltage falls below the set alarm limit, (see chapter "Setting the
operating voltage alarm limit"), the device sends the following message:
If the operating voltage then increases above the alarm removal limit, the unit sends the
following message:
6.5.

Power outage alarm

The device can detect power outages and save their start and end times in its memory.
Once power supply is restored, the device sends the following message:
Examples:
In other words, the power outage has started on 3 October 2018 at 11:30 am and the power
has been restored on 3 October 2018 at 12:10 pm.
<device name> Battery voltage low on <alarm time>
<device name> Battery voltage low off <alarm removal time>
<device name> Power down after<power outage start time>
Power up <power outage end time>
idOil-30 Battery 3G
Power down after 2018-10-03 11:30
Power up 2018-10-03 12:10
idOil-30 3G
Power down 2018-10-03 11:30
Power up 2018-10-03 12:10
18/19
DOC001696-EN-1