Connecting Through The Ssh Console - Moxa Technologies ioThinx 4530 Series User Manual

ioThinx 4530 Linux Manual
3. Select the Serial connection type and choose settings.

Connecting Through the SSH Console

The ioThinx 4530 controller supports SSH connections over an Ethernet network. Use the following default
IP addresses to connect to the ioThinx 4530 controller.
Port
LAN 1
LAN 2
Linux Users
NOTE
These steps apply to the Linux PC you are using to connect to the ioThinx 4530 controller. Do NOT apply
these steps to the ioThinx 4530 controller itself. Before you run the
IP address of your notebook/PC's Ethernet interface in the range of 192.168.127.0/24 for LAN1 and
192.168.126.0/24 for LAN2.
ssh
Use the command from a Linux computer to access the ioThinx 4530 controller's LAN1 port.
user@PC1:~ ssh moxa@192.168. 127.254
Type yes to complete the connection.
The authenticity of host '192.168. 127.254' can't be established.
RSA key fingerprint is 8b:ee:ff:84:41:25:fc:cd:2a:f2:92:8f:cb:1f:6b:2f.
Are you sure you want to continue connection (yes/no)? yes_
Default IP
192.168.127.254
192.168.126.254
ssh
2-4
Getting Started
command, be sure to configure the