Summary of Contents for Moxa Technologies WAC-2004 Series
Page 1
WAC-2004 Series Quick Installation Guide Second Edition, May 2014 2014 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. P/N: 1802020040011...
WAC-2004 is rated to operate at temperatures of 0 to 50°C and is rugged enough for on-site installation in any harsh industrial environment. Package Checklist The WAC-2004 series wireless access controller is shipped with the following items. If any of these items are missing or damaged, please contact your customer service representative.
Panel Layout of the WAC-2004 Series Front Panel View Back Panel View 1. Rackmount kit 2. LAN 1: 10/100/1000 BaseT(X) (RJ45-type) 3. LAN 2-4: reserved for future expansion (RJ45-type) 4. Power reset button 5. LAN1 LEDs: 100M/1000M 6. LAN 2-4 LEDs: reserved for future expansion 7.
Grounding the WAC-2004 Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground wire from the ground screw on the rear side (shown below) to the grounding surface prior to connecting devices. ATTENTION This product is to be mounted to a well-grounded mounting surface, such as a metal panel.
NOTE The pin numbers for the 8-pin RJ45 connectors (and ports) are typically not labeled on the connector (or port). Refer to the diagram above to see how the RJ45’s pins are numbered. Serial Console Connection The WAC-2004 offers one serial port with DB9 male connector for its console access.
Need help?
Do you have a question about the WAC-2004 Series and is the answer not in the manual?
Questions and answers