3 Using the IRB 14000
3.4 Operating modes
Continued
The operator panel
The operator panel is used to switch between Manual mode and Automatic mode.
The operator panel is located under the Quickset menu, see
on page
xx1500000005
38
32.
Note
It is also possible to use the predefined I/O-signals to change and confirm the
operating mode, see
I/O signals on page
© Copyright 2015-2018 ABB. All rights reserved.
The Quickset menu
45.
Operating manual - IRB 14000
3HAC052986-001 Revision: E