Recommended Design Rules - Danfoss VLT MCA 121 EtherNet/IP Manual

3 How to Install

3.1.6 Recommended Design Rules

While designing Ethernet networks special attention and caution must be taken regarding active network components.
While designing a network for line topology it is important to notice that a small delay is added with each every switch in the line.
It is not recommended to connect more than 32 drives in a line at any API. Exceeding the recommended design rules, may result in failing communication.
3
12
VLT VLT VLT VLT
AutomationDrive AutomationDrive AutomationDrive AutomationDrive AutomationDrive
Max. 32 drives
VLT VLT VLT VLT
AutomationDrive AutomationDrive AutomationDrive AutomationDrive AutomationDrive
®
MG.90.J2.02 - VLT is a registered Danfoss trademark
VLT VLT VLT
AutomationDrive AutomationDrive
VLT VLT VLT
AutomationDrive AutomationDrive
MCA 121 EtherNet/IP