GE Baker Hughes oxy.IQ User Manual page 16

Chapter 2. Installation
2.1 Mounting the oxy.IQ (cont.)
Install the oxy.IQ by completing the following steps:
1. Remove the oxy.IQ and the separately-packaged oxygen sensor
(see Figure 3 below) from the shipping container. Keep the
shipping container and packaging material for possible future
use.
IMPORTANT:
DO NOT open the oxygen sensor package until you are
ready to install the sensor.
2. Remove the sensor manifold by unscrewing it from the blue
knurled nut on the sensor base at the bottom of the electronics
module.
6
Figure 3: Packaged Oxygen Sensor
oxy.IQ User's Manual