System Led; Power Module Status Leds; Seven-Segment Led - H3C S5810 Series Quick Start Manual

SFP+ interface status LED
Management Ethernet port status LED

System LED

Table 1-10 System LED description
LED
SYS

Power Module Status LEDs

Table 1-11 Description of the LEDs
Mark
PWR1
PWR2

Seven-Segment LED

The seven-segment LED and the system LED together indicate the operating status of the device. For
details, refer to Table 1-12.
Table 1-12 Seven-segment LED description
Mark
Unit
Flashing green
LED
Status
Steady green
Flashing green (1 Hz)
Steady red
Flashing yellow (1 Hz)
Off
Status
Hot swappable power module slot 1 is installed with a power
Steady green
module, and the power input is normal.
Hot swappable power module slot 1 is installed with a power
Steady yellow
module, but an output failure occurs.
No power module is installed in hot swappable power module
Off
slot 1, or no power is input.
Hot swappable power module slot 2 is installed with a power
Steady green
module, and the power input is normal.
Hot swappable power module slot 2 is installed with a power
Steady yellow
module, but an output failure occurs.
No power module is installed in hot swappable power module
Off
slot 2, or no power is input.
Status
System LED
Seven-segment LED status
(SYS) status
The LED displays the specific
Description
See SFP+ Interface Status LED on page 1-13.
See Management Ethernet Port Status LED on page
1-13.
Description
The switch is started normally.
The system is performing POST.
POST failed.
POST on some ports failed.
The switch is powered off.
Status
1-10
Description
POST running. The LED