H3C S5810 Series Quick Start Manual page 37

Memory Size
Flash Size
CPLD Version
PCB Version
Mac Address
Press Ctrl-B to enter Extended Boot menu...1
The last line asks whether you want to enter the Boot Menu. The system waits one second for your
response.
The system has two startup modes: normal startup and fast startup. The normal startup mode
takes a little longer time than the fast startup mode because of more self-test operations.
By default, the system starts up in fast mode and the waiting time here is one second. If you set the
startup mode to normal, the waiting time is five seconds. For the setting of the startup mode, refer
to the next section.
If you press Ctrl + B within one second, the Boot Menu is displayed:
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current configuration file
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 4-1 describes the fields above.
Table 4-1 Description on the fields
Item
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
: 512MB
: 256MB
: 000
: Ver.A
: 00E0FC005810
Download the application file to the flash memory
Select the application file to boot
Display all files in the flash memory
Delete files from the flash memory
Modify the Boot ROM password
Description
4-6