Management Ethernet Port
The S5810 series provides a management Ethernet port, which connects to a computer to perform
system program loading and debugging without being affected by the switching chip working status; or
the management Ethernet port can be connected to a remote NMS to implement remote management
of the system.
Table 1-3 S5810 management Ethernet port specifications
Item
Connector type
Connector quantity
Port transmission rate
Transmission medium and
maximum transmission distance
Function and service
USB Interface
Each S5810 series provides a USB interface compliant with the OHC standard, supporting an upload
and download speed of 12 Mbps. With this USB interface, you can access the file system on the flash of
the switch to upload or download application and configuration files.
10/100/1000Base-T Ethernet Port
Each S5810 series provides forty-eight 10/100/1000Base-T Ethernet ports on its front panel. Table 1-4
describes the specifications of the 10/100/1000Base-T Ethernet ports.
Table 1-4 S5810 series 10/100/1000Base-T Ethernet port specifications
Item
Connector type
Interface standard
Max transmission distance
Transmission medium
Standard
100/1000Base-X SFP Interface
Each S5810 series provides two 100/1000Base-X SFP interfaces on its front panel. Each SFP interface
and its corresponding Ethernet port form a combo port group. Only one port is available in a combo port
group at one time. Table 1-5 describes the combo port groups.
RJ-45
1
10/100/1000 Mbps half duplex, full duplex
Category-5 twisted pair cable, with a maximum transmission
distance of 100 m (328.1 ft.)
Host software, Boot ROM upgrade, and network management
RJ-45
10 Mbps half duplex, full duplex
100 Mbps half duplex, full duplex
1000 Mbps half duplex, full duplex
MDI/MDI-X, auto-sensing
100 m (328.1 ft.)
Category-5 unshielded twisted pair cable
IEEE 802.3i, 802.3u, 802.3ab
1-6
Specification
Specification