H3C S5810 Series Quick Start Manual page 40

Creation Date
CPU Clock Speed : 750MHz
Memory Size
Flash Size
CPLD Version
PCB Version
Mac Address
Press Ctrl-B to enter Extended Boot menu...5
In normal startup mode, the waiting time here is five seconds. If you press Ctrl + B within five seconds,
the Boot Menu is displayed. If you perform no operation or press a key other than Ctrl + B within five
seconds, the system begins to automatically start up and the following information is displayed:
Starting to get the main application file--flash:/S5810_release.bin............
The main application file is self-decompressing................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
..........................Done!
System is starting...
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is
completed.
Press Enter. The following prompt is displayed:
<H3C>
You can configure the switch now.
The H3C Series switches provide abundant command views. For detailed descriptions about the
configuration commands and CLI, refer to H3C S5810 Series Ethernet Switches Operation Manual and
H3C S5810 Series Ethernet Switches Command Manual.
: Dec 15 2008,14:19:14
: 512MB
: 256MB
: 000
: Ver.A
: 00E0FC005810
4-9