About This Manual - H3C S5810 Series Quick Start Manual

About This Manual

Organization
H3C S5810 Series Ethernet Switches Quick Start is organized as follows:
Chapter
1 Product Overview
2 Installation Preparations
3 Installing a Switch
4 Initial Power-On
5 Maintenance and
Troubleshooting
Appendix
Conventions
The manual uses the following conventions:
GUI conventions
Convention
< >
[ ]
/
Symbols
Convention
Briefly introduces the appearance, system description, as well as
the features and applications of the H3C S5810 series switches.
Describes the requirements on installation site, the safety
recommendations before and during installation, and the required
tools.
Covers the procedures for installing the H3C S5810 series,
ground wire connection, power module installation, interface
module installation, and so on.
Helps you get familiar with the basic knowledge of how to boot and
configure the H3C S5810 series, including device startup,
power-on, and initialization of system files, and so on.
Introduces how to maintain software and hardware of the H3C
S5810 series.
Appendix A: Lightning protection of the H3C S5810 series switch.
Appendix B: Provides Compliance and safety manual.
Button names are inside angle brackets. For example, click <OK>.
Window names, menu items, data table and field names are inside
square brackets. For example, pop up the [New User] window.
Multi-level menus are separated by forward slashes. For example,
[File/Create/Folder].
Means reader be extremely careful. Improper operation may cause
bodily injury.
Means reader be careful. Improper operation may cause data loss or
damage to equipment.
Means a complementary description.
Contents
Description
Description