Mounting The Switch To A Rack - H3C S5810 Series Quick Start Manual

and rear mounting (because the installation procedures of the two brackets are the same, each
figure shows only how to install one bracket).
2) Fasten the M4x8 screws.
Figure 3-3 Attach the mounting bracket to an S5810 for front mounting
Figure 3-4 Attach the mounting bracket to an S5810 for center mounting
Figure 3-5 Attach the mounting bracket to an S5810 for rear mounting

Mounting the Switch to a Rack

1) Wear an ESD-preventive wrist strap and make sure the rack is well grounded and is firm enough to
hold the switch and cables.
2) Attach the mounting brackets to the switch. For details, refer to Attaching the Mounting Brackets to
a Switch.
3) Hold the bottom of the switch and gently place the switch on the rack to a proper location with one
person.
4) Fix the mounting brackets with screws (anti-rust screws prepared by yourself) with another person
to install the switch to the rack horizontally.
3-2