Table of Contents
Advertisement
2.2 Motherboard Installation
All motherboards have standard mounting holes to fi t different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
JF1
VPP_CPU2
JNVI2C2
LE2
JF2
GPU
JGPW3
JL1
NVME12
P2_NVMe1
NVME13
P2_NVMe2
FAN8
Location of Mounting Holes
Notes: 1. To avoid damaging the motherboard and its components, please do not use
a force greater than 12 lb/inch on each mounting screw during motherboard installation.
2. Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (13)
VGA
COM1
IPMI_LAN
SXB2
LEDM1
BMC
JLAN1
SXB1-1
SXB1_2
BIOS
JSDCARD1
PCH_PORT1
JPME1
JBT1
RAID KEY-1
CPU2
_DMI
PCH
U45
BT1
SP1
SXB1_3
JSD1
JSD2
X11DPU-XLL
REV:1.02
BAR CODE
DESIGNED IN USA
CPU2
FAN7
FAN6
FAN5
23
Standoffs (13)
Only if Needed
USB0/1(3.0)
JP2
JRK1
PSU2
JNVI2C1
NVME 10 NVME11
P1_NVMe1
P1_NVMe2
VPP_CPU1
BIOS
LICENSE
IPMI CODE
CPU1
FAN4
FAN3
FAN2
Chapter 2: Installation
PSU1
Advertisement
Table of Contents
