Supermicro X11DPU-XLL User Manual page 130

Super X11DPU-XLL User Manual
6. Using a different system, extract the BIOS package into a USB fl ash drive.
7. Press <Del> continuously during system boot to enter the BIOS Setup utility. From the
top of the tool bar, select Boot to enter the submenu. From the submenu list, select Boot
Option #1 as shown below. Then, set Boot Option #1 to [UEFI AP:UEFI: Built-in EFI
Shell]. Press <F4> to save the settings and exit the BIOS Setup utility.
8. When the UEFI Shell prompt appears, type fs# to change the device directory path. Go
to the directory that contains the BIOS package you extracted earlier from Step 6. Enter
fl ash.nsh BIOSname.### at the prompt to start the BIOS update process.
130