Super X11DPU-XLL User's Manual
Motherboard Features
CPU
•
This motherboard supports dual Intel Xeon Scalable-SP and 2nd Gen Intel Xeon Scalable-SP processors (Socket P) which
offer Intel® UltraPath Interconnect (UPI) links of up to 10.4 G/s
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 18 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 4TB of 3DS Load Reduced DIMM (3DS LRDIMM), Load Reduced DIMM
(LRDIMM), 3DS Registered DIMM (3DS RDIMM), Registered DIMM (RDIMM), Non-Volatile DIMM (NV-DIMM) DDR4
(288-pin) ECC memory with speeds of 2933*/2666/2400/2133 MHz in 16 slots.
*Note: Support for 2933 MHz memory is dependent on the CPU SKU.
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel® C621 chipset
Expansion Slots
•
1 PCI-E 3.0 (x16 + x16) WIO left riser card support
•
1 PCI-E 3.0 x8 (in x16) WIO center right hand riser
•
1 PCI-E 3.0 (x16 + x16 + x8) far right Ultra IO Riser Slot
•
4 NVMe PCI-E 3.0 x4 slots
Network
•
BMC RJ45 ports and LAN options via Ultra Riser
BaseBoard Management Controller (BMC)
•
ASPEED AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
•
One (1) dedicated IPMI LAN located on the rear IO back panel
Graphics
•
Graphics controller via ASPEED AST2500
Note: The table above is continued on the next page.
Motherboard Features
14
http://www.supermicro.com/products/