Table of Contents
Advertisement
Super X11DPU-XLL User's Manual
CMOS Clear
JBT1 is used to clear CMOS, which will also clear any passwords. Instead of pins, this jumper
consists of contact pads to prevent accidentally clearing the contents of CMOS.
To Clear CMOS
1. First power down the system and unplug the power cord(s).
2. Remove the cover of the chassis to access the motherboard.
3. Remove the onboard battery from the motherboard.
4. Short the CMOS pads with a metal object such as a small screwdriver for at least four
seconds.
5. Remove the screwdriver (or shorting device).
6. Replace the cover, reconnect the power cord(s), and power on the system.
Note: Clearing CMOS will also clear all passwords.
Do not use the PW_ON connector to clear CMOS.
SXB2
SXB1-1
SXB1_2
PCH_PORT1
CPU2
_DMI
SXB1_3
JF1
VPP_CPU2
JNVI2C2
CPU2
LE2
JF2
GPU
JGPW3
JL1
NVME12
P2_NVMe1
NVME13
P2_NVMe2
FAN8
FAN7
FAN6
VGA
COM1
IPMI_LAN
USB0/1(3.0)
LEDM1
BMC
JLAN1
BIOS
JSDCARD1
JP2
JPME1
JRK1
JBT1
RAID KEY-1
1
PCH
U45
BT1
SP1
JSD1
JSD2
X11DPU-XLL
BIOS
LICENSE
REV:1.02
IPMI CODE
BAR CODE
DESIGNED IN USA
FAN4
FAN5
PSU2
PSU1
JNVI2C1
NVME 10 NVME11
P1_NVMe1
P1_NVMe2
VPP_CPU1
CPU1
FAN3
FAN2
56
JBT1 contact pads
1. Clear CMOS
Advertisement
Table of Contents
