Table of Contents
Advertisement
Super X11DPU-XLL User's Manual
SLOT1 PCI-E 3.0 X8 (IN X16) OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the M.2 slot specifi ed by the user. Select Legacy to allow the user to boot
the computer using a legacy device installed on the M.2 slot specifi ed by the user. The options
are Disabled, Legacy and EFI.
SLOT2 PCI-E 3.0 X16 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the M.2 slot specifi ed by the user. Select Legacy to allow the user to boot
the computer using a legacy device installed on the M.2 slot specifi ed by the user. The options
are Disabled, Legacy and EFI.
SLOT3 PCI-E 3.0 X8 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the M.2 slot specifi ed by the user. Select Legacy to allow the user to boot
the computer using a legacy device installed on the M.2 slot specifi ed by the user. The options
are Disabled, Legacy and EFI.
SLOT1 PCI-E X16 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the M.2 slot specifi ed by the user. Select Legacy to allow the user to boot
the computer using a legacy device installed on the M.2 slot specifi ed by the user. The options
are Disabled, Legacy and EFI.
SLOT2 PCI-E X16 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the M.2 slot specifi ed by the user. Select Legacy to allow the user to boot
the computer using a legacy device installed on the M.2 slot specifi ed by the user. The options
are Disabled, Legacy and EFI.
Bus Master Enable
If this setting is set to Enabled, the PCI Bus Driver will enable the Bus Master Attribute for
DMA transactions. If this setting is set to Disabled, the PCI Bus Driver will disable the Bus
Master Attribute for Pre-Boot DMA protection. The options are Disabled and Enabled.
Onboard LAN1 Option ROM
Use this feature to select the type of device installed in LAN Port1, which will be used for
system boot. The options are PXE, iSCSI, EFI and Disabled.
Onboard LAN2~4 Option ROM
Use this feature to select the type of device installed in LAN Port2~4, which will be used for
system boot. The options are PXE and Disabled.
92
Advertisement
Table of Contents
