I/O Devices
•
Serial (COM) Port
•
SATA 3.0
•
SAS 3.0
Peripheral Devices
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 0/1)
•
One (1) Type-A USB 3.0 connector for front access (USB 2)
•
One (1) internal USB 3.0 header with two (2) USB connections on the motherboard for front access (USB 3/4)
BIOS
•
64 MB SPI AMI BIOS
SM Flash UEFI BIOS
®
•
ACPI 3.0 or later, PCI F/W 3.0, SMBIOS 2.7 or later
Power Management
•
ACPI power management
•
Power-on mode for AC power recovery
•
Wake-On-LAN
System Health Monitoring
•
Onboard voltage monitoring for +3.3V, +5V, +12V, CPU Core, PCH 1.05V, +3.3V standby, VBAT, Memory, PCH Temp,
System Temp, Memory Temp
•
6 CPU switching-phase voltage regulator
•
CPU/system overheat LED and control
•
CPU Thermal Trip support
•
PECI / TSI
•
CPU Thermal Design Power (TDP) support of up to 205W
Fan Control
•
Eight 4-pin fan headers
•
Multi-speed fan control via onboard BMC
System Management
•
Trusted Platform Module (TPM) support
•
Watch Dog / Non-maskable interrupt
•
RoHS
•
BMC SD Card Slot
•
Chassis intrusion header and detection (Note: Please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
Motherboard Features
•
One (1) serial-port header
•
Total of 14 SATA 3 ports:
•
Eight (8) SATA 3.0 ports supported by Intel PCH C621 (I-SATA 0-7)
•
Four (4) S-SATA 3.0 ports supported by Intel PCH C621 (S-SATA 0-3)
•
Two (2) SATA 3.0 SuperDOM connectors (S-SATA4, S-SATA5)
•
SAS3 expansion AOM via Ultra Riser
15
Chapter 1: Introduction