Table of Contents
Advertisement
Super X11DPU-XLL User Manual
The fi le system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32)
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM fi le if the media size becomes too
large due to the huge volumes of folders and fi les stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. Using a different machine, copy the "Super.ROM" binary image fi le into the Root "\"
directory of a USB device or a writable CD/DVD.
Notes: 1. If you cannot locate the "Super.ROM" fi le in your drive disk, visit our website
at
www.supermicro.com
age into a USB fl ash device and rename it "Super.ROM" for the BIOS recovery use. 2.
Before recovering the main BIOS image, confi rm that the "Super.ROM" binary image
fi le you download is the same version or a close version meant for your motherboard.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and reset the system when the following screen appears.
3. After locating the healthy BIOS binary image, the system will enter the BIOS Recovery
menu as shown below.
to download the BIOS package. Extract the BIOS binary im-
128
Advertisement
Table of Contents
