Jumper Description; Default Setting - Supermicro X9DRG-OF-CPU User Manual

Jumper
Description
JBR1 BIOS Recovery
JBT1 Clear CMOS
JPB1 BMC Enabled
JPG1 VGA Enabled
JPL1 GLAN1/GLAN2 Enable
JPME1 Management Engine (ME)
Recovery Mode
JPME2 Management Engine (ME)
Manufacture Mode
JWD1 Watch Dog Timer Enable
Connectors
BT1
COM1
FAN1-8
J21
J31/32/33/34
JF1
JL1
JOH1
JPW3-JPW7,
JPW12-JPW16
JPW17-JPW18
JPW21/22/23/24
JSD1/JSD2
JTPM1
LAN1/LAN2
(IPMI) LAN
I-SATA 0-5
S-SATA 1-4
SP1
SW1
T-SGPIO1/2
X9DRG-O(T)F-CPU Board Jumpers
X9DRG-O(T)F-CPU Connectors
Description
Onboard CMOS Battery (See Chpt. 3 for Used Battery Disposal)
Serial Port (COM1) Header
CPU/System Cooling Fans
X9DRG-O(T)F-CPU CPLD Programming
Slot for Riser Card (RSC-X9DRG-O)
Front Panel Control Header
Chassis Intrusion
Overheat LED Header
PCIe Add-on Card AUX Power Connector
HDD Backplane Power Connector (See warning on next page)
Power Supply Power Connector
SATA DOM (Devices on Module) Power Connectors
TPM (Trusted Platform Module)/Port 80
X540_based 10G Ethernet LAN Ports 1/2 (X9DRG-OTF-CPU); I350_based
1G LAN Ports 1/2 (X9DRG-OF-CPU)
IPMI_Dedicated LAN
SATA 3.0 Connectors (I-SATA 0/1), SATA 2.0 Connectors (I-SATA 2-5) from
AHCI
SATA 2.0 connectors from SCU (S-SATA 1-4)
Onboard Speaker Header
UID Switch
Serial_Link General Purpose I/O Header 1 for I-SATA Ports 0~3
Serial_Link General Purpose I/O Header 2 for I-SATA Ports 4~5
1-7
Chapter 1: Overview

Default Setting

Pins 1-2 (Normal)
See Chapter 2
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)