Mounting; Programming Overview; Inputs; Installation Of Configuration Software - Globalstar SmartOne Series User Manual

Mounting

The SMARTONE is designed to be mounted to an asset using double-sided
adhesive tape and/or the included mounting bracket. The mounting bracket
has four screws that attach to the asset and allows the SMARTONE to be
mounted so the antenna can face the sky whether mounted internally or
externally. This enables the antenna to have a direct view of the sky
with mounting flexibility. The SMARTONE attaches to the mounting
bracket using four Phillips-head screws.

Programming Overview

The SMARTONE comes ready to use with a factory configuration loaded in
the device. The factory configuration, Standard Messaging without Motion
and Interval Messaging of 12 hours, may be changed using the SMARTONE
Configuration Software, the USB Configuration Cable and a PC.

Inputs

The SMARTONE has two inputs that can be accessed by using the SMARTONE
Input Cable, which is sold as an accessory to the device.

Installation of Configuration Software

The SMARTONE Configuration Software can be downloaded from the Spot
website at www.globalstar.com. Log-in to your VAR account using your username
and password. The Configuration Software is located in the software
downloads section and is supported by Windows 7, Windows Vista, Windows XP
Service Pack 2, Windows 2000 and Windows 98.
SmartOne Manual Rev 1.5 DOC# 9100-0268-01 p.12