Options Tab - Globalstar SmartOne Series User Manual

messages throughout the time the device is in the State of Vibration.
Accumulate/Count Message: The SMARTONE can accumulate hours and events
while input 1 or input 2 is enabled. The SMARTONE can send an
accumulate/count message once the configurable number of hours or events
have been reached. In addition, The SMARTONE can send the actual value
of accumulated hours and events at configurable intervals specified in
days, hours, and minutes.

Options Tab

Device Turned On Message. The SMARTONE can be configured to send or not
send a Device Turned On Message on Power-up. The default is enabled.
Interval for Replace Battery Message. The SMARTONE can be configured to
transmit a Replace Battery message based on a low battery condition.
Configuration range extends from 0 to 45 days in steps of a day. The
default is 1 day.
The SMARTONE will detect low battery conditions while at least 100 more
messages can still be transmitted.
Interval for Diagnostic Message. The SMARTONE can send a diagnostic
SmartOne Manual Rev 1.5 DOC# 9100-0268-01 p.38