Theft Recovery Mode; Change Of Location Area Tab; Inside Change Of Location Area Section - Globalstar SmartOne Series User Manual

Theft Recovery Mode

Change of Location Area Tab

Inside Change of Location Area Section

The parameters in this section define the functionality of the device
while inside its Change of Location Area while in Theft Recovery Mode.
Change of Location Range. Change of Location Range specifies the length
(in meters, kilometers, yards, or miles) from the center of the Change
of Location Area. If the SMARTONE detects that it has left its Change of
Location Area, the device will enter into a Recovery Mode witch is
defined by the In Motion Interval within Outside Change of Location
Area.
SmartOne Manual Rev 1.5 DOC# 9100-0268-01 p.40