Globalstar SmartOne Series User Manual page 18

Send Location Message - causes the SMARTONE connected to the
COM port to obtain a GPS fix and send a Location Message.
Send Diagnostic Message – causes the SMARTONE connected to
send diagnostic information including battery status, GPS
average search time, GPS fails and number of transmissions
since last diagnostic message.
Send Data w/GPS Message - causes the SMARTONE to seek a GPS
location, and then send a Truncated SMARTONE message (type 1).
The hex-character data in the text box below the command will be
appended to the GPS data and sent.
Send Data w/o GPS message - causes the SMARTONE to send the first
8 bytes of data in the text box above the command as the payload
for the Raw Payload Message (type 2). The hex-character data in
the text box above the command will be sent instead of the normal
SMARTONE position data.
Close – causes the pop up window to close.
Read Diagnostic Information from Device. This command line causes the
Configuration Software to query the diagnostic information from the
SMARTONE and display the information in a pop up window in a text
format.
SmartOne Manual Rev 1.5 DOC# 9100-0268-01 p.18