Input Settings Tab - Globalstar SmartOne Series User Manual

Input Settings Tab

Status Changed Message. The SMARTONE has two inputs that can be
configured to send a Status Changed Message once the selected input
opens, closes, or in both events. The Message sent can or cannot contain
the GPS coordinates of the device at the time the status of the input(s)
changed.
Undesired State Message. The SMARTONE can be configured to send messages
throughout the time the input is in the desired state, either to opened
or closed position. The message interval while the input is active can
be configured in Days, Hours, and Minutes. Once the input is de
activated, the SMARTONE will return to the message interval or time (s)
of day for Location Messages.
Accumulate/Count Message: The SMARTONE can accumulate hours and events
while input 1 or input 2 is enabled. The SMARTONE can send an
accumulate/count message once the configurable intervals specified in
days, hours, and minutes. If Times of Day is selected, user will specify
SmartOne Manual Rev 1.5 DOC# 9100-0268-01 p.25