Standard Messaging Mode With Motion; Motion Settings Tab - Globalstar SmartOne Series User Manual

Standard Messaging Mode with Motion

Motion Settings Tab

The Motion Settings Tab of the Configuration Software is used to define
the Message Interval while In Motion. This tab also contains the
Vibration Sensor Settings, which define how the sensitivity of the
Vibration Sensor and how it determines the device is In Motion.
Message Interval while In Motion. This parameter defines the
transmission interval of location messages while SMARTONE is In Motion
with a transmission rate between 5 to 65,000 minutes (45 Days). The
default is 10 minutes.
Vibration Sensor Settings Button. This button activates the Vibration
Settings window. This window contains settings to define how the
vibration sensor determines that the SMARTONE is In Motion. These
parameters include Level of Sensitivity for Vibration Sensor, Time to be
in a State of Vibration and the Time to be in a State of Lacking
Vibration.
SmartOne Manual Rev 1.5 DOC# 9100-0268-01 p.28