Components Of The System - Nikon Eclipse Series Instructions Manual

1

Components of the System

If the system has not yet been assembled, see Chapter 3 "Assembly" first.
For details on assembling and handling the microscope, see the instruction manual supplied with the microscope.
This attachment can be mounted on the ECLIPSE Ni-E, Ni-U, Ci-E, Ci-S, Ci-L, 90i, 80i, 50i, E600W, E600 or E400
microscope.
Note that the illustrations in this manual shows the ECLIPSE Ci-S microscope for convenience.
Depending on the type of set you have purchased, some of the following components may not be included.
Dual-viewing (face-to-face)
This model allows the main observer and the secondary observer to be positioned face-to-face during observation.
Dual-viewing (side-by-side)
This model allows the main observer and the secondary observer to be positioned side-by-side during observation.
When a pointer is going be used, assemble the system so that the secondary observer will be positioned on the right. If
reversed, the pointer control section will be at the rear of the microscope.
Pointer
Microscope
Pointer
Microscope
AC adapter
Eyepieces for secondary observer
Eyepiece tube for secondary observer
Teaching head F-F
Heat protection shield
(provided with the teaching head F-F)
AC adapter
Teaching head S-S
(Mounting ring)
1
Eyepieces for
secondary observer
Eyepiece tube for
secondary observer
Support stand
(Height adjustment clamp screw)