Specifications - Nikon Eclipse Series Instructions Manual

6

Specifications

Teaching Head F-F, Teaching Head S-S, MTH Main Splitter, MTH Relay Unit
Attachment Magnification: 1x (at both main and secondary observer positions)
Pointer
Y-THP Pointer Unit
Designation:
Input Voltage:
Lamp for Arrow Illumination: 6 V - 0.2 A tungsten lamp (average lifetime: 1,000 hours)
Arrow Color:
Arrow Illumination Voltage:
Conforming Standards:
Y-THPL LED Pointer Unit
Designation:
LED for Arrow Illumination:
Arrow Color:
Arrow Illumination Current:
Conforming Standards:
AC Adapter
For Y-THP and Y-THPL
Designation:
Input Voltage:
Output Voltage:
Conforming Standards:
Only for Y-THP
Designation:
Input Voltage:
Output Voltage:
Conforming Standards:
Y-THP
DC 9 V, 0.5 A max.
Green or orange (switchable)
0 to 6 V (by brightness control that also acts as ON/OFF switch)
● With AC adapter described below.
This product meets EU Low Voltage Directive requirements.
This product meets EU EMC Directive requirements.
This product meets FCC Part 15, Subpart B requirements.
Y-THPL
White LED
Green or orange (switchable)
0 to 20 mA (by brightness control that also acts as ON/OFF switch)
● With AC adapter described below.
This product meets EU Low Voltage Directive requirements.
This product meets EU EMC Directive requirements.
This product meets FCC Part 15, Subpart B requirements.
SPU16A-104
AC 100 to 240 V ±10%, 50/60 Hz, 0.4 A
DC 9 V, 1.66 A
UL/GS/PSE Approved.
3A-161DB09
AC 100 to 240 V ±10%, 50/60 Hz, 0.6 A
DC 9 V, 1.66 A
UL/GS/PSE Approved.
13