Table of Contents
Advertisement
The instrument and sample are now ready for the test to be carried out
(Figure 4).
Figure 4. Manual Clemen Unit ready for test
3.2 Test procedure
1. Pull the sample platform towards you in a single smooth action (Figure 4);
the standard speed of movement is approximately 30 mm/s (1.2"/s).
The tool will lower down onto the sample at the start of the test and raise up
at the end of the test.
2. Inspect the sample for damage in accordance with the requirements of the
test standard. Repeat the test as necessary, increasing the loading
between tests.
R
7
Advertisement
Table of Contents
